|
|
For single source file 8051 projects the process is very simple. Compile
your programs with the following command "sdcc
sourcefile.c". This will compile, assemble and link your
source file. Output files are as follows:
- sourcefile.asm - Assembler source
file created by the compiler
- sourcefile.lst - Assembler listing
file created by the Assembler
- sourcefile.rst - Assembler listing
file updated with linkedit information, created by linkage editor
- sourcefile.sym - symbol listing
for the sourcefile, created by the assembler
- sourcefile.rel or sourcefile.o
- Object file created by the assembler, input
to Linkage editor
- sourcefile.map - The memory map
for the load module, created by the Linker
- sourcefile.mem - A file with a summary of the memory
usage
- sourcefile.ihx - The load module in Intel hex format
(you can select the Motorola S19 format
with --out-fmt-s19. If you need another
format you might want to use objdump
or srecord
- see also section sub:Postprocessing-the-Intel). Both formats
are documented in the documentation of srecord
- sourcefile.adb - An intermediate file containing
debug information needed to create the .cdb file (with --debug)
- sourcefile.cdb - An optional file (with --debug)
containing debug information. The format is documented in cdbfileformat.pdf
- sourcefile. - (no extension) An optional
AOMF or AOMF51 file containing
debug information (generated with option --debug). The (Intel)
absolute object module format is a subformat
of the OMF51 format and is commonly used by third party tools (debuggers,
simulators, emulators).
- sourcefile.dump* - Dump file to debug the compiler
it self (generated with option --dumpall) (see section 3.2.10
and section 9.1 ''Anatomy of the compiler'').
Next: 3.1.2 Postprocessing the Intel
Up: 3.1 Compiling
Previous: 3.1 Compiling
Contents
Index
2008-02-29
|